Line lock install pics?
3 posters
Page 1 of 1
Line lock install pics?
This may not be posted in the right area but wondered, for those of you who run a line lock, where you installed it and if you could post some pics of your installation?
Thanks,
Bill
Thanks,
Bill
wbaker01- G3GM Member
- Street Cred : 0
Re: Line lock install pics?
I havent installed mine yet but I plan on putting it by the washer fluid reservoir. And purchasing (2) stainless braided lines to make the connections. Just so I dont ruin the new brake lines.
If I were running an automatic car, I'd put the line lock on the rear brake line. That way you dont step on the brakes at all, press the button and no pressure can go to the back wheels. Now when you step on the brake only your front brakes are working. So its easy to spin the rear wheels holding only the front brakes. Then just let off slightly and creep down the block slowly in a smokey burnout. Thats how I'd go with an automatic.
If I were running an automatic car, I'd put the line lock on the rear brake line. That way you dont step on the brakes at all, press the button and no pressure can go to the back wheels. Now when you step on the brake only your front brakes are working. So its easy to spin the rear wheels holding only the front brakes. Then just let off slightly and creep down the block slowly in a smokey burnout. Thats how I'd go with an automatic.
Joe73- Donating Member
- Street Cred : 83
Re: Line lock install pics?
Line lock now you have my attention. What product / parts you guys using ?
Dinomyte- Donating Member
- Street Cred : 11
Re: Line lock install pics?
Thanks Joe..
Dinomyte, I bought the Hurst Roll Control and am planning out the install..
Dinomyte, I bought the Hurst Roll Control and am planning out the install..
wbaker01- G3GM Member
- Street Cred : 0
Re: Line lock install pics?
I had a roll control. Good unit. Sold it years ago. I have a jegs waiting to go in now.
Joe73- Donating Member
- Street Cred : 83
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Yesterday at 7:25 pm by 77camino
» 77 elco SS
Tue Mar 26, 2024 4:35 pm by Whisperer
» 3-g cars in Finland
Tue Mar 26, 2024 11:33 am by Finn Monte
» Stainless brake lines
Mon Mar 25, 2024 4:37 pm by Joe73
» New chassis for my 73
Sun Mar 24, 2024 9:39 pm by g3chevy / Mr Pontiac
» 1973 Chevelle SS, 350, 4spd. build
Fri Mar 22, 2024 4:21 pm by Joe73
» Rusty's progress Hood sorta Finalized and other Updates
Thu Mar 21, 2024 4:58 pm by Limey SE
» cluster metal trim
Thu Mar 21, 2024 10:23 am by Joe73
» Nos wheel well moldings
Wed Mar 20, 2024 3:33 pm by Limey SE
» Dash assembly for 73-77 Malibu/Monte/El Camino,etc.
Wed Mar 20, 2024 11:26 am by Limey SE