1977 Chevelle SE part 5/17/19 tinkering

Page 2 of 2 Previous  1, 2

Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Mcarlo77 on Sun Apr 28, 2019 12:58 pm

Depressing...we escaped that here in Mpls.
Mcarlo77
Mcarlo77
Donating Member
Donating Member

Street Cred : 68

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Sun Apr 28, 2019 5:40 pm

Swapped some interior for the wheels Today they might look familiar to a certain member here that sold a Maroon Chevelle with a wicked roll cage in it  



1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Receiv13
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190410

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 54729611

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Thu May 09, 2019 9:45 am

So Rods /pistons I got taken on for the 396 Build so started to look again and for what the next set of rods pistons were gonna cost I got the 100% complete 454 from this Motorhome, Hopefully by Sunday will be out

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 56347711
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 59914510
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 59989510
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 57016911
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 59334910
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 59720710

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Thu May 09, 2019 10:07 am

Test fitted the Wheels yesterday on there and think they fit very well

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190515
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190513
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190514

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by thatfnthing on Thu May 09, 2019 1:49 pm

Yes they do!
thatfnthing
thatfnthing
Donating Member
Donating Member

Street Cred : 58

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Sun May 12, 2019 8:51 pm

Well the Nightmare is Finally over I have liberated the Motorhome 454 and transmission I WOULD NEVER RECOMEMNED this LMAO


1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60081410
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60313810
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60256810
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 59971811
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60341610

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by 73ss on Mon May 13, 2019 5:59 pm

Hey Limey,

If you don't have plans for the Q-jet I'd be interested. $40 plus the ride? If you want to sell, send a pic of the top and the side where the throttle attaches. There should be some numbers running vertically where the throttle is, should be 1708####.
Thanks.

Is that a brake drum on the end of the tranny? Nice score!!
73ss
73ss
G3GM Member
G3GM Member

Street Cred : 10

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Mon May 13, 2019 6:37 pm

its a Parking brake for the Motorhome

And yes I will be selling the Quadrajet But already have an Offer of $150 for it and motor only has 65k on it so I don't see why it would not be a good carb Just have to remove it and grab some pics for ev1

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by 73ss on Mon May 13, 2019 8:04 pm

You can't turn that down. I'm sure it will be a good carb. It will have to be re-worked for street use. Motorhome carbs have a odd-ball jet/rod set up because the engine is under constant load in RV.

That's a nice trans also, Heavy duty unit compared to a car one.
Thanks for the reply..
73ss
73ss
G3GM Member
G3GM Member

Street Cred : 10

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Mon May 13, 2019 9:55 pm

It will be sent with the 4 barrel intake also as I have a better one I will be using instead, and apparently he was blowing smoke up my arse ….. But I will list it for $100 plus ship

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Tue May 14, 2019 11:35 pm

Well the 454 is on the stand ready to dive into it YAYYY I don't want to do this again so hopefully all the internals will hold up Only thing I am re using is the Block, Crank, Rods, Pistons everything else will be switched out

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60803910

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by thatfnthing on Wed May 15, 2019 10:41 am

If it was intended to survive in a motor home, I have to expect the SE would be almost 'light' duty. Though I suppose that depends on how much your right foot weighs...
thatfnthing
thatfnthing
Donating Member
Donating Member

Street Cred : 58

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Wed May 15, 2019 11:17 am

Heart is light foot is like a rock Just like the Brand I drive LOL

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by bracketchev1221 on Wed May 15, 2019 11:48 am

The parts in that engine will be fine for a street car. The crank and pistons are most likely cast. I believe the rods in a 1 ton truck would be 7/16” bolt rods.
bracketchev1221
bracketchev1221
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 15

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Thu May 16, 2019 7:54 pm

OK I need a Guru here I have tried looking up these and some people Claim with out a doubt a Peanut port head Then I look up the link they said to look to verify ….It then says its an Oval port Head

OVAL PORT - Valve size 2.06 intake, 1.72 exhaust
14092360 1985-89 454 Open truck

http://www.nastyz28.com/bbcmenu.html?fbclid=IwAR1gfr4MOyZM7iy_rStVIW0SOKwwpgzvlbqppEa88ZKlhkei8pEMXN6CG4g

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60320410
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60464910
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 60608110

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by bigredlaguna on Thu May 16, 2019 9:02 pm

Yup, those are peanut port heads. Nothing wrong with them unless you want to go past 4500 rpm or so.

Cam it up just a bit, or higher ratio rockers on the stock cam. Stock shift points in the trans and 2.73 gears would be the order of the day for these heads.

Here is a pic of 360 head intake ports that is for sale right now on Ebay. You can see the oval port gasket imprint vs the port.

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 360_bi10
bigredlaguna
bigredlaguna
G3GM Senior Member
G3GM Senior Member

Street Cred : 53

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Thu May 16, 2019 10:11 pm

Thanks Bobby looks like the 781 Heads are winning this battle pretty easy, will check pistons tomorrow when I pull them

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by bracketchev1221 on Fri May 17, 2019 7:19 am

Yes they are peanut port heads.  That is all that was available on truck applications.  The large oval port like the 781 went out in the earlier 80's. The pistons will most likely be a flat top piston with a relief for the intake valve. So you will be looking at a low 8:1 compression engine.
bracketchev1221
bracketchev1221
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 15

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Limey SE on Fri May 17, 2019 6:40 pm

Well More tinkering Got Intake, carb off today. Progress is progress

Cam from what I can see of Looks good with no worn lobes, gonna pull pan to verify if 2 or 4 bolt and to put the Car oil pan on it RV pan way to big, Cant wait to clean block and paint it orange Like its supposed be LOL

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190518
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190516
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 20190517

___________________________________________
1977 Chevelle SE part 5/17/19 tinkering  - Page 2 12527912
Limey SE
Limey SE
Management
Management

Street Cred : 91

Back to top Go down

1977 Chevelle SE part 5/17/19 tinkering  - Page 2 Empty Re: 1977 Chevelle SE part 5/17/19 tinkering

Post by Sponsored content


Sponsored content


Back to top Go down

Page 2 of 2 Previous  1, 2

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum