Need Help; Core Support Cover & Fan Shroud
Need Help; Core Support Cover & Fan Shroud
by BBMALIBU on Fri Apr 03, 2015 7:54 pm
Hey Everyone,
Could someone with a 73-77 Malibu/Chevelle with a BBC and factory fan shroud, please post some pictures of:
1. The fan shroud mounting to the radiator core support cover
2. The left & right side of the shroud and radiator
3. Lower mount area
I have a problem with the shroud not fitting correctly. When I install the shroud, the top holes don't line up with the radiator core support cover.
In order for me to line the holes up, I would have to remove about 1/2 inch off the driver side of the shroud.
But then, the shroud looks like it would be off center from the clutch fan/water pump.
I am starting to think that I either have the wrong radiator core support cover, or it was manufactured incorrectly.
It is a chrome one made by Morose with 4 bolts, I bought it many years ago.
Are the covers for the 68-72 chevelles different than 73-77?
Any help will be greatly appreciated.
Could someone with a 73-77 Malibu/Chevelle with a BBC and factory fan shroud, please post some pictures of:
1. The fan shroud mounting to the radiator core support cover
2. The left & right side of the shroud and radiator
3. Lower mount area
I have a problem with the shroud not fitting correctly. When I install the shroud, the top holes don't line up with the radiator core support cover.
In order for me to line the holes up, I would have to remove about 1/2 inch off the driver side of the shroud.
But then, the shroud looks like it would be off center from the clutch fan/water pump.
I am starting to think that I either have the wrong radiator core support cover, or it was manufactured incorrectly.
It is a chrome one made by Morose with 4 bolts, I bought it many years ago.
Are the covers for the 68-72 chevelles different than 73-77?
Any help will be greatly appreciated.
BBMALIBU- G3GM Member
- Street Cred : 2
Re: Need Help; Core Support Cover & Fan Shroud
by Limey SE on Fri Apr 03, 2015 8:50 pm
Yes I do believe the core support cover will be different from 72 down and 73-77
Limey SE- Management
- Street Cred : 90
Re: Need Help; Core Support Cover & Fan Shroud
by BBMALIBU on Sat Apr 04, 2015 5:06 pm
Please dismiss my original post, need new glasses 
New question:
When going from a factory 2 row radiator to a HD 4 row, has anyone had to modify (cut) the fan shroud on the drivers side?
New question:
When going from a factory 2 row radiator to a HD 4 row, has anyone had to modify (cut) the fan shroud on the drivers side?
BBMALIBU- G3GM Member
- Street Cred : 2
Permissions in this forum:
You cannot reply to topics in this forum
» What are you listning to right now?
» Tie Rod Question
» My 73 Chevelle turbo LS swap
» need some help
» Long time Monte Carlo owner
» Holley 750 Vacuum secondaries, dual feed, Square Bore
» Bench seat ...
» 350 small block
» Holley 570 Avenger Vacuum 4150 Dual Feed with fuel line.