Re: Rusty's progress motor Parts arrived LOL Half are on

by Limey SE Wed Mar 08, 2023 12:00 am

76Chevelle2Tone wrote:Thanks. Those look like UMI 421516 kit arms. Is that right? Did any bolts come with that or what else are you using if they didn't?

i bought all mine (not rear end) in a package deal for the yukon posi carrier, 3.42 gears, Hardware kit and the rear end cover from a monte carlo group on FB

FIRST OPTION BELOW $399 and ship ( I HAVE THIS ONE and bought hardware at Hardware store for 12 bucks) Grade 8 and washers and rear end Bushing Rockauto 18 bucks shipped compared to UMI at 59 bucks

https://www.umiperformance.com/home/product/1973-1977-gm-a-body-upper-lower-control-arm-kit/

Rusty's progress motor Parts arrived LOL Half are on - Page 7 421516a_LRG-600x400

Rusty's progress motor Parts arrived LOL Half are on - Page 7 421516a_LRG-600x400

SECOND OPTION BELOW $459 and ship

https://www.umiperformance.com/home/product/1973-1977-gm-a-body-upper-lower-control-arm-kit-copy/ Rusty's progress motor Parts arrived LOL Half are on - Page 7 ABR301a_LRG-600x400

Rusty's progress motor Parts arrived LOL Half are on - Page 7 ABR301a_LRG-600x400

by 76Chevelle2Tone Wed Mar 08, 2023 12:15 am

Thanks. I didn't see the second expanded kit for some reason. Please let us know how they work out. I was thinking of getting the QA 52894 rear sway bar. I'm not sure if it mates with these but think it likely would.

by Limey SE Wed Mar 08, 2023 12:51 am

76Chevelle2Tone wrote:Thanks. I didn't see the second expanded kit for some reason. Please let us know how they work out. I was thinking of getting the QA 52894 rear sway bar. I'm not sure if it mates with these but think it likely would.

Just get the Impala 9c1 Police taxi package from an Impala 1" and front from like a 74 ish Trans Am and get 1 1/4"

I also believe I just seen a guy get QA1 sway bar and had to get there Bars also for it was a Side mount compared to our Normal of Bottom mount

by 76Chevelle2Tone Wed Mar 08, 2023 1:19 am

Yes looking more closely at the QA sway bar pictures I can see that there might be an attachment issue. I already have a 1.25 inch front sway bar. I will look for the Chevy used 1 inch rear bars. What years were the compatible 1 inch sway bars used on GM models?

by Limey SE Wed Mar 08, 2023 1:42 am

1977 and Caprice and Impala and also 94-96 Impala SS Make sure its an 8.5 10 bolt some of the Older ones come with both the 7.5 and 8.5 rear

by 76Chevelle2Tone Wed Mar 08, 2023 1:51 am

I am aware of the 10 bolt issue.

by Limey SE Sun Mar 19, 2023 11:09 am

A little progress is still progress isn't it ? I have to use the original sway bar mount till I get the New trailing arms in so I made a swap deal for old Sway bar for these sway bar mounts that were in perfect condition cleaned up with 80 then then 150 then one coat of rust preventive then three coats of shiny black stuff
Big THANK YOU to Jesse "biggmonte" Vargas Facebook friend for swapping

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33680110

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33689510

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33664610

by g3chevy / Mr Pontiac Sun Mar 19, 2023 8:22 pm

Those are not as easy to find as they used to be. Looking good Limey!

by Limey SE Sun Mar 19, 2023 8:57 pm

g3chevy / Mr Pontiac wrote:Those are not as easy to find as they used to be. Looking good Limey!

yupper I know that GMPARTSDIRECT has discontinued them by over a year SO I sent my Old Ones with my Derby friend (My mechanic for our Ram truck) And he is taking to the Shop to fab a set up and if works Gonna make a crap load of them at one time while he is willing to do them or until his derby season kiks off in a few months YAYYYYYY

by Limey SE Thu Mar 23, 2023 3:14 pm

Sway bar brackets painted / INSTALLED
Impala SS Rear Sway Bar INSTALLED
A little more at a time knocked out will be ready soon I hope anyways LOL

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33664611

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33651710

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33030810

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33659910

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33572710

by g3chevy / Mr Pontiac Thu Mar 23, 2023 6:22 pm

Nice!

by Limey SE Thu Mar 23, 2023 9:46 pm

Another kinda warm day Rain held off till tonight Lower UMI bars are in ran outta daylight and heat to put away bar back one PROGRESS IS PROGRESS !!

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33662110

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33645810

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33766010

by Limey SE Fri Mar 24, 2023 6:52 pm

Uppers are in now just need shocks switched I don't have an angled 1/2" wrench (gonna make one tomorrow) then axle swap is the only thing left

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2039

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2041

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2040

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2043

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2042

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2044

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2046

Rusty's progress motor Parts arrived LOL Half are on - Page 7 Img_2045

by Limey SE Wed Mar 29, 2023 8:49 pm

WELL I have my work CUT OUT for me YES ??? Anyways emptied Rusty out and got my Seats to where I think they need to be, SO with that Kevin Stroh I will be getting in touch for 2 sets of Mounts like we talked about Will need to get the measurements to you.
I can use two of the four factory mounts with one being the main Seat belt hole and welded front corner bolt so will Have Plenty of strength behind it in case of an Accident (God forbid) Seats will be a good start, And daughter changed her mind yet again on Interior color she wants Oxblood like her Dash is, So with that My interior will get Full on Black and Car will Be triple black with the stripes, The family I bought the car from is working on them to replicate them for me, Unknowingly to me before He sent car here he Took a tracing of them and is gonna Have them replicated for me SO THAT MEANS when we get moved into House that may / may not have a garage I believe at winter time 2024, This 1977 Chevelle SE Will be coming off frame after i drive for a year or so. AND ALWAYS IF YOU READ THIS FAR SAY A HELL YEA PLEASE and dont forget to subscribe to my Youtube channel for Updates and Funny shorts I have one there now its Hilarious LMAO thanks for reading my book

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33832010

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33858310

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33864610

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33866910

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33852710

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33858010

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33833910

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33742910

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33856510

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33865610

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33844110

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33849010

Rusty's progress motor Parts arrived LOL Half are on - Page 7 33854710

by g3chevy / Mr Pontiac Wed Mar 29, 2023 11:55 pm

Hell yeah! And subscribed!

by jpowen49 Thu Mar 30, 2023 8:01 am

Hell yeah ! subscribed

by 76Chevelle2Tone Wed Apr 26, 2023 1:39 pm

Terribly sorry to hijack your thread over the rear sway bar but, having got the UMI rear control arms you did albeit black, I am looking for the impala rear sway bar as you advised. However I see two different sizes listed for them 1 inch and 1 1/8 inch. Are people just mistaken or were there actually 2 sizes? I have searched repeatedly but can't find definite answer.

by Limey SE Wed Apr 26, 2023 2:31 pm

76Chevelle2Tone wrote:Terribly sorry to hijack your thread over the rear sway bar but, having got the UMI rear control arms you did albeit black, I am looking for the impala rear sway bar as you advised. However I see two different sizes listed for them 1 inch and 1 1/8 inch. Are people just mistaken or were there actually 2 sizes? I have searched repeatedly but can't find definite answer.

No worries buddy
There are two different sizes Yes BUT Impala ONLY was 1" to the best of my knowledge ........there are aftermarket ones I believe that go to 1.5" but thats just overkill in my book

by 76Chevelle2Tone Wed Apr 26, 2023 2:47 pm

Limey SE wrote:
76Chevelle2Tone wrote:Terribly sorry to hijack your thread over the rear sway bar but, having got the UMI rear control arms you did albeit black, I am looking for the impala rear sway bar as you advised. However I see two different sizes listed for them 1 inch and 1 1/8 inch. Are people just mistaken or were there actually 2 sizes? I have searched repeatedly but can't find definite answer.

No worries buddy
There are two different sizes Yes BUT Impala ONLY was 1" to the best of my knowledge ........there are aftermarket ones I believe that go to 1.5" but thats just overkill in my book

To be clear I'm talking about the used sway bars from the 90s, not aftermarket. Yes I see at least three different sizes in aftermarket but I am only referring to listings of used 90s era chevy sway bars. So I gather from your statement that there may well be stock rear sway bars at 1 1/8 as well as as 1 inch depending on which chevy they were pulled from. To be safe then (1 inch) they Must come from Impala.

by Limey SE Wed Apr 26, 2023 2:57 pm

They Can come from any 9c1 optioned Police car Taxi cab but easiest to Find is the Impala SS from 94 -96

26mm is the size needed Pics shows conversion from mm to inches

Rusty's progress motor Parts arrived LOL Half are on - Page 7 341138873_622825896538695_6767461462101236100_n.png?_nc_cat=101&ccb=1-7&_nc_sid=ae9488&_nc_ohc=pzsmhuNnUeoAX-6FEww&_nc_ht=scontent-ord5-1

Rusty's progress motor Parts arrived LOL Half are on - Page 7 341138873_622825896538695_6767461462101236100_n.png?_nc_cat=101&ccb=1-7&_nc_sid=ae9488&_nc_ohc=pzsmhuNnUeoAX-6FEww&_nc_ht=scontent-ord5-1

by Limey SE Thu Apr 27, 2023 8:58 pm

So when u get grounded from wrenching on car because of a leg injury what do you do ??
You sit in a chair AND trace your stripes on said car so they can be remade LMAO

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34307211

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34263610

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34307210

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34273610

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34313710

Rusty's progress motor Parts arrived LOL Half are on - Page 7 34327410

by 76Chevelle2Tone Thu Apr 27, 2023 9:03 pm

Limey,
I hope you heal fast. You are clearly not happy if you are away from your special SE.

by Limey SE Thu Apr 27, 2023 9:21 pm

76Chevelle2Tone wrote:Limey,
I hope you heal fast. You are clearly not happy if you are away from your special SE.

Well If I could sleep in it I would but she wont let me LMAO All kidding aside its from my Celluitis in my leg and some the OG guys/gals here know I almost Lost my leg because of it Back in 2018 and she put her foot down when I put a gouge in my leg about 2'long 1" wide.

When you get it as bad as I had it before, You lose all the elasticity to the skin and if I Breathe on it to hard it breaks open LOL I came into Kitchen and told her I need your Help she immediately replied How bad is it and how many band aids do I need to bring with She seen how bad it actually was and told me to Pull pant leg up to stop the bleeding it was a good deep gouge, Hense the grounding from wrenching till healed up again GOOD WOMAN I HAVE

P.S. PLUS ITS OUT MY FRONT DOOR so never far away

by g3chevy / Mr Pontiac Fri Apr 28, 2023 12:07 am

Heal quickly Limey! Don't want your SE to feel neglected!

by 76Chevelle2Tone Sat Apr 29, 2023 5:15 pm

I missed the part where you put a sport wheel into what I assume is your daughter's SE? Where did you get it or is it photoshopped haha?

by Sponsored content

Rusty's progress motor Parts arrived LOL Half are on