Bumper Fillers!
+5
Limey SE
Hawk03
Bret Mullikin
pila
bigredlaguna
9 posters
Bumper Fillers!
done
http://www.replica-plastics.com/Manlist.aspx
http://www.replica-plastics.com/Manlist.aspx
bigredlaguna- G3GM Senior Member
- Street Cred : 53
Re: Bumper Fillers!
I bought some from that place for my '74 Malibu, about 5 years ago. They fit OK, and at least they aren't the rubber type like originals.
pila- Donating Member
- Street Cred : 43
bumper fillers
I am still looking for rear bumper fillers for my 74. Can I have some more opinions on aftermarket repros, please?
Thanks,
Bret
Thanks,
Bret
Bret Mullikin- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
How about E & K bumper fillers? They are ABS and guaranteed not to rot or crack. How do they fit? You can also find them under Sandknit Industries.
Bret Mullikin- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
Has anyone purchased the 76/77 rear center bumper filler from Replica Plastics? It looks like the correct one but its hard to tell by the pictures.
http://www.replica-plastics.com/product/che-76-rcf-rear-center-filler-73-77/
The right and left rear fillers for the 76/77 don't look correct from the pictures but that could be the pictures.
http://www.replica-plastics.com/product/che-76-rlf-rear-left-filler-73-77/
I just need a base to start with so if they are a decent fit, that will work for me and I will work them until they fit how I want them.
http://www.replica-plastics.com/product/che-76-rcf-rear-center-filler-73-77/
The right and left rear fillers for the 76/77 don't look correct from the pictures but that could be the pictures.
http://www.replica-plastics.com/product/che-76-rlf-rear-left-filler-73-77/
I just need a base to start with so if they are a decent fit, that will work for me and I will work them until they fit how I want them.
Hawk03- G3GM Enthusiast
- Street Cred : 18
Re: Bumper Fillers!
Why not Buy the original one I have for sale ???
https://www.g3gm.com/t9794-1976-1977-malibu-rear-bumper-filler
https://www.g3gm.com/t9794-1976-1977-malibu-rear-bumper-filler
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: Bumper Fillers!
My original one is fine. I need a fiberglass one.
Hawk03- G3GM Enthusiast
- Street Cred : 18
Re: Bumper Fillers!
10-4
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: Bumper Fillers!
I just got a set of the replica plastics, they are fiberglass and have little give. The mounting holes don't match up and the bumper has to be removed to mount. I ended up taking mine to get painted and letting the shop install them. I don't have the patience and didn't want to mess up the parts.
redrider- G3GM Newbie
- Street Cred : 0
Re: Bumper Fillers!
REPLICA PLASTICS
Ordered the 3 piece set of rear bumper fillers for a 76 chevelle/malibu.
269.00 shipped. Took over 2 months to get them. A total disappointment , I can`t believe they would even ship this cr**. I can make the center piece work  with some trimming  but the  left and right pieces are useless.
Ordered the 3 piece set of rear bumper fillers for a 76 chevelle/malibu.
269.00 shipped. Took over 2 months to get them. A total disappointment , I can`t believe they would even ship this cr**. I can make the center piece work  with some trimming  but the  left and right pieces are useless.
jpowen49- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
Unfortunately, this seems to be an ongoing problem over the years with Replica Plastics. Apparently, they still haven't gotten it right.
Mcarlo77- Donating Member
- Street Cred : 77
Re: Bumper Fillers!
Thank you g3chevy, I am interested in the fillers. Please post pictures when you get a chance.
jpowen49- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
I could use a little help with trying to fit the center filler to the tail light bezel panel piece. I need to trim the fiberglass piece to fit the blue metal retainer. I disassembled the car about 15 years ago and didn`t realize it would be this long before I could reassemble. I didn`t have a phone with a camera back then but I did try to bag every thing ( Label  not so much ). Can someone tell me what fasteners I need to bolt the two together (10 pcs) ?
Thank you for any help.
Thank you for any help.
jpowen49- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
I just did this on mine around November Maybe October it was small little bolts maybe 7 or 8 mm with captured nut clips Let me see in my Pics if I can find them
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
jpowen49 likes this post
Re: Bumper Fillers!
Thank you g3chevy for the quick response. I could try to make them work.
What do you want for them ? Thank you, Jerry
What do you want for them ? Thank you, Jerry
jpowen49- G3GM Member
- Street Cred : 0
Re: Bumper Fillers!
jpowen49 wrote: Thank you g3chevy for the quick response. I could try to make them work.
What do you want for them ? Thank you, Jerry
PM Sent
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 33
Permissions in this forum:
You cannot reply to topics in this forum
Yesterday at 10:51 am by Mcarlo77
» 1973 Chevelle SS, 350, 4spd. build
Yesterday at 10:10 am by Joe73
» Five Decades?
Yesterday at 8:23 am by Iggy
» cluster metal trim
Sun Mar 17, 2024 8:02 pm by 76Chevelle2Tone
» 1977 Olds 442 in MN
Sun Mar 17, 2024 12:11 pm by g3chevy / Mr Pontiac
» Nos wheel well moldings
Sat Mar 16, 2024 9:58 pm by Limey SE
» Dual Dash Speaker Setup (Sent out and gone now)
Fri Mar 15, 2024 4:09 pm by fasrnur
» Rusty's progress Hood sorta Finalized and other Updates
Fri Mar 15, 2024 1:51 pm by bracketchev1221
» speedometer pointer bouncing
Wed Mar 13, 2024 10:27 pm by 76Chevelle2Tone
» WANTED 73-77 Chevelle 442 rear window louvers
Wed Mar 13, 2024 2:52 pm by Limey SE