Spindles
3 posters
Page 1 of 1
Spindles
Anyone have a hollander manual available to check if the spindles from the mid to late 70's camaros are interchangeable with ours?
I'm looking at different drop spindles and McGaughy's has a set for camaros, but only for 70-72 chevelles.
I'm looking at different drop spindles and McGaughy's has a set for camaros, but only for 70-72 chevelles.
Biomedtech- G3GM Member
- Street Cred : 5
Re: Spindles
I got this info from the site: Spindles from a 70-81 camaro-75-77 nova, are interchangeable. However as I have found out, the aftermarket companies seem to know this too, because they are hard to find also. If your looking for drop spindles look at Detroit speed, and Fatman Fabrications. They carry them. If you have time, look into previous threads here and you will find all the info you need.
Bruisr- G3GM Member
- Street Cred : 8
Re: Spindles
Look on page 2 of the G3 tech acticles under chassis and suspension then drop spindles or springs.
Bruisr- G3GM Member
- Street Cred : 8
Re: Spindles
Just for the record on this thread, yes, they're interchangeable.
brownbomber77- G3GM Member
- Street Cred : 4
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» Q-Jet Tuning
» PARTS NEED TO GO FOR OUR MOVE I DONT WANNA TAKE WITH
» Need driver side bucket seat 73 Laguna
» Laguna NOSE
» Virtual Ink from this weekend
» 1973 Chevelle SS Station Wagon
» Elcofest 2023
» Wanted drip rails for 1975 four-door Chevelle Malibu-Thanks!
» Parts please