Paint
+4
dynchel
driveit
BicknellWelding
Pontichev327
8 posters
Paint
Found this "done well" flat blacker on the web. Looks like a matte clear coat too.
Could probably use another couple of clear coats but all & all- "Friggin Ahsum".

Could probably use another couple of clear coats but all & all- "Friggin Ahsum".

77mali- Donating Member
- Street Cred : 62
Re: Paint

Pontichev327- G3GM Enthusiast
- Street Cred : 7
Re: Paint
Looks like little dent on the door
. Those wheels do look like "peeling" cragars that someone painted the centers. Looks cool on a small budget


dynchel- Donating Member
- Street Cred : 40
Re: Paint
I had considered going with a flat black for my car, I like that look!
driveit- Donating Member
- Street Cred : 15
Re: Paint
I drove my now red one around for a year working out all the bugs before body work in just ppg's Dp90 Epoxy black. It was nice that you did not have to worry about scratches. I used grey epoxy first after meda blasting it then black over that so when body work time came I knew when to stop sanding when I hit the grey. [url=[url=https://servimg.com/view/17248508/203]

Wallyuph- Donating Member
- Street Cred : 31
Re: Paint
Flat Black Is Beautiful
Just very hard to do...
Por15 makes a few good topcoats also, going to try a black as a base & see what it looks like on the roof. If I ever get to body work...LOL


Por15 makes a few good topcoats also, going to try a black as a base & see what it looks like on the roof. If I ever get to body work...LOL
77mali- Donating Member
- Street Cred : 62
Re: Paint
I like that and I love those 73 tail lights. I almost wish mine had those instead of the 74, but I like th e74 too. 74 and 74 are my favs.
driveit- Donating Member
- Street Cred : 15
Re: Paint
Maybe, but look around the center cap you can see chrome under the grey.dragons_lair59 wrote:They do make a gunmetal craigar I believe
dynchel- Donating Member
- Street Cred : 40
Re: Paint
I totally agree that those are budget quicky painted and probably won't last long as the chrome is pealing
dragons_lair59- Donating Member
- Street Cred : 11
Re: Paint
Pontichev327 wrote:Are those blacked out Cragar S/S rims? I like, but just wondering what brand.
Yes them are Black out Cragar S/S
Limey SE- Management
- Street Cred : 97
Re: Paint
77mali wrote:Flat Black Is BeautifulJust very hard to do...
![]()
Por15 makes a few good topcoats also, going to try a black as a base & see what it looks like on the roof. If I ever get to body work...LOL
I did that on my green 76 That I swapped for my Tahoe
Limey SE- Management
- Street Cred : 97
Re: Paint
So I picked it apart here for flaws. I think that door ding is a bad paint over lap, same thing on the hood if you look close. The L rear Qtr looks like a painted over bond-o patch also.

All this will show up if you use the Krylon brand flat black, which I think was used on this car. Their tech services told me that it's dry in 10 minutes and you have to apply any multiple layer-coat before the previous coat fully drys to the touch or it'll bubble & peel. They don't refer to this paint as either enamel or lacquer. If you save the full size pic & open with the photo gallery, you can really see it.Good thing there are other brands out there.
I used it as a base coat on one of my small parts & it worked good, with a wet on wet using Duplicolor flat black as the top coat & Duplicolor clear "matte" in a can. I don't think I'd try the Krylon on an entire car though, not enough time for the big stuff.



All this will show up if you use the Krylon brand flat black, which I think was used on this car. Their tech services told me that it's dry in 10 minutes and you have to apply any multiple layer-coat before the previous coat fully drys to the touch or it'll bubble & peel. They don't refer to this paint as either enamel or lacquer. If you save the full size pic & open with the photo gallery, you can really see it.Good thing there are other brands out there.
I used it as a base coat on one of my small parts & it worked good, with a wet on wet using Duplicolor flat black as the top coat & Duplicolor clear "matte" in a can. I don't think I'd try the Krylon on an entire car though, not enough time for the big stuff.


77mali- Donating Member
- Street Cred : 62
Re: Paint
Wallyuph wrote:I drove my now red one around for a year working out all the bugs before body work in just ppg's Dp90 Epoxy black. It was nice that you did not have to worry about scratches. I used grey epoxy first after meda blasting it then black over that so when body work time came I knew when to stop sanding when I hit the grey. [url=[url=https://servimg.com/view/17248508/203]
Wally, you still have those kick a$$ hub caps?
77mali- Donating Member
- Street Cred : 62
Re: Paint
Sorry sold them on Ebay I believe. next time I'm up in shed I'll look
Wallyuph- Donating Member
- Street Cred : 31
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» 2022 Street Machine Nationals.
» Need some thoughts on my 73 Laguana (sell or restore ) need advice
» Hood ornament
» Realistic Value of My '73 (for insurance purposes, not selling)
» Chevelle Roof & Belt Line Stripes?
» 1973 Chevelle
» 75 differential
» SS shifter knob wanted
» WOW, have parts gotten expensive!