our new house with a soon to be parts haven....
+11
1973montec
DiscoMalibu
Jim_Rockford
Limey SE
cees klumper
knightfan26917
Tom77
74MonteCarlo
Roadcaptain S3
Famstyle
ant7377
15 posters
Page 2 of 2 • 
1, 2
Re: our new house with a soon to be parts haven....
by Jim_Rockford Tue May 29, 2012 8:48 pm
I close on the 11th of next month...Can't wait.
Jim_Rockford- G3GM Member
- Street Cred : 4
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Thu Jul 26, 2012 11:44 am
started to do some little things around house and barn.
i made a shelf for 3 complete dashes.
the middle one is the original black one taken out of my 73 in 2002. still very nice with only 2 cracks.
a hardly noticeable one pass side
and of course the speaker grill
than i put up my dealer poster boards in the basement.
left to right/top to bottom
1985-1979-1978
1975-1974-1973
(little) 1973
1973-1973
1978 corvette
i made a shelf for 3 complete dashes.
the middle one is the original black one taken out of my 73 in 2002. still very nice with only 2 cracks.
a hardly noticeable one pass side
and of course the speaker grill
than i put up my dealer poster boards in the basement.
left to right/top to bottom
1985-1979-1978
1975-1974-1973
(little) 1973
1973-1973
1978 corvette
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Thu Aug 02, 2012 5:33 pm
concrete pad for the new hot-tub just got poured. now have to let it set up for 10 days. 
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Sat Aug 04, 2012 10:54 am
brought some door panels home and put them in there new resting place.
set up a couple of shelfs and poof
the new home of 10 sets and 6 odd balls
also found some round gauge bezels.
set up a couple of shelfs and poof
the new home of 10 sets and 6 odd balls
also found some round gauge bezels.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 77mali Sat Aug 04, 2012 11:08 am
Find an circuit boards for sport gauges?
77mali- Donating Member
- Street Cred : 62
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Sat Aug 04, 2012 12:11 pm
I have an NOS one somewhere. But saving it for the Monte one day.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by DiscoMalibu Sun Aug 05, 2012 11:27 pm
Holy door panels! 
DiscoMalibu- G3GM Member
- Street Cred : 7
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Mon Aug 06, 2012 4:09 pm
brought some more stuff home today.
found some visors boxed away
73 monte NOS front bumper,still in its blanket.
some doors and 2 rear ends
and yes one is a posi,
3:42 i think
and my 73 big oval port 454
as some of you know,someone stoled my original 454 for my monte. so i had to buy another motor. what i found by accident about 5 years ago was a 1973 chevelle 454. if i researched my numbers correctly.
T0802CWA
and part of the vin number 137(Z?)5000
if someone out there still has this chevelle with this vin number,i will sell it for (pinky to mouth)$1,000,000.00
found some visors boxed away
73 monte NOS front bumper,still in its blanket.
some doors and 2 rear ends
and yes one is a posi,
3:42 i thinkand my 73 big oval port 454
as some of you know,someone stoled my original 454 for my monte. so i had to buy another motor. what i found by accident about 5 years ago was a 1973 chevelle 454. if i researched my numbers correctly.
T0802CWA
and part of the vin number 137(Z?)5000
if someone out there still has this chevelle with this vin number,i will sell it for (pinky to mouth)$1,000,000.00
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Mon Aug 06, 2012 6:19 pm
DiscoMalibu wrote:Holy door panels!
and I will NEVER pay top dollar for aftermarket.....
http://www.opgi.com/p/interior-soft-trim/7979/159/C2411.html
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Mon Aug 06, 2012 6:36 pm
OK so i took the cover off the posi. it is not a bolt in axel type,it has C-clips. dont know if i should be happy or cry.
the mini bolt is still intacked
there are numbers on the carrier
410 403 GM61
and i tried to count the teeth. if im right i have 41 on the BIG gear,and 15 on the pinion. so im guessing again that i have a 2:73 posi. i dont know how i came up with the 3:42 in previous message. guess thats just what was in my head since i pulled it out of a $40.00 parts car 17 years ago.
the mini bolt is still intacked
there are numbers on the carrier
410 403 GM61
and i tried to count the teeth. if im right i have 41 on the BIG gear,and 15 on the pinion. so im guessing again that i have a 2:73 posi.
i dont know how i came up with the 3:42 in previous message. guess thats just what was in my head since i pulled it out of a $40.00 parts car 17 years ago.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by JB2wheeler Mon Aug 06, 2012 8:20 pm
The axle ratio and posi or not, can be found on the axle tube half way between the pumpkin and brake backing plate and facing the front of the car. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Mon Aug 13, 2012 5:13 pm
found some a-pillar trim.
found some original "73" front bumper fillers
found some original "73" front bumper fillers
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973montec Tue Aug 14, 2012 2:18 pm
if you ever need any help,you need to let me know.....
1973montec- Donating Member
- Street Cred : 17
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Tue Aug 14, 2012 2:30 pm
1973montec wrote:if you ever need any help,you need to let me know.....
thanx BRO i will
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Tue Aug 14, 2012 2:34 pm
brought home 3 more dashes
Last edited by 1973 454 MONTE on Thu Aug 16, 2012 2:28 pm; edited 1 time in total
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Tue Aug 14, 2012 2:39 pm
JB2wheeler wrote:The axle ratio and posi or not, can be found on the axle tube half way between the pumpkin and brake backing plate and facing the front of the car. JB
thanx JB,but it is so rusty i cant see nuttin.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 77mali Tue Aug 14, 2012 5:54 pm
1973 454 MONTE wrote:JB2wheeler wrote:The axle ratio and posi or not, can be found on the axle tube half way between the pumpkin and brake backing plate and facing the front of the car. JB
thanx JB,but it is so rusty i cant see nuttin.
I'ts on the drivers side exactly where JB says...I used PB Blaster & a small wire brush, found it no problem under similar rust conditions. You'll prob need a nice bright flashlight too.
77mali- Donating Member
- Street Cred : 62
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Tue Aug 14, 2012 6:02 pm
77mali wrote:1973 454 MONTE wrote:JB2wheeler wrote:The axle ratio and posi or not, can be found on the axle tube half way between the pumpkin and brake backing plate and facing the front of the car. JB
thanx JB,but it is so rusty i cant see nuttin.
I'ts on the drivers side exactly where JB says...I used PB Blaster & a small wire brush, found it no problem under similar rust conditions. You'll prob need a nice bright flashlight too.
Thanx. I will find it one day.
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 77mali Tue Aug 14, 2012 6:27 pm
Oh...Lord, It's the Passengers side...Long day today, LOL.
77mali- Donating Member
- Street Cred : 62
Re: our new house with a soon to be parts haven....
by JB2wheeler Tue Aug 14, 2012 8:23 pm
Passenger side is right. JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: our new house with a soon to be parts haven....
by maliburacinfreak Wed Aug 15, 2012 7:31 pm
number of teeth of both gears should be stamped on the outside edge of the ring gear.
maliburacinfreak- Donating Member
- Street Cred : 6
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Thu Aug 16, 2012 12:34 pm
maliburacinfreak wrote:number of teeth of both gears should be stamped on the outside edge of the ring gear.
yeahhhhhhhhhhhhhhhhhhhhhhh
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: our new house with a soon to be parts haven....
by 1973 454 MONTE Thu Aug 16, 2012 2:34 pm
brought home the last of my dashes.
now they get to stay in there respected spot and not being bothered for awhile..
now they get to stay in there respected spot and not being bothered for awhile..
1973 454 MONTE- Donating Member
- Street Cred : 36
Page 2 of 2 • 1, 2
Similar topics» This is why I haven't been around so much!
» FREE Finally a garage for SE at new house
» Christmas Open House
» FREE Finally a garage for SE at new house
» Christmas Open House
Permissions in this forum:
You cannot reply to topics in this forum|
|
|
» fuel gauge malfunction?
» Chevelle Power Trunk Release
» G3 Chevy rims- help ID these
» Buckskin vinyl washout
» You know I love a good bike
» MONTE FRONT BUMPER TUCK
» Life & Back On The Radio
» Tips for Dash Removal?
» 8.5" 28 Spline Detroit Locker VS. GM 3 Series Posi for 80s Build