Swivel bucket mounts and belts
+2
1973 454 MONTE
g3chevy / Mr Pontiac
6 posters
Swivel bucket mounts and belts
I will be doing this to my sons 75 soon. Wondering if anyone is reproducing the bucket mounts? Does anyone on this board have a picture of what they look like installed in case I need to fab them? Also does anyone have an extra set of seat belts for buckets laying around they would be willing to sell?
Hopefully the ls1 will be going in this weekend!
Thanks
Hopefully the ls1 will be going in this weekend!
Thanks
michiganlarry- G3GM Member
- Street Cred : 1
Re: Swivel bucket mounts and belts
michiganlarry wrote:I will be doing this to my sons 75 soon. Wondering if anyone is reproducing the bucket mounts? Does anyone on this board have a picture of what they look like installed in case I need to fab them? Also does anyone have an extra set of seat belts for buckets laying around they would be willing to sell?
Hopefully the ls1 will be going in this weekend!
Thanks
Here's a couple of pics for reference. As far as I know there are no reproduction parts made for mounting bucket seats for these cars. Your best bet is to find a donor car and cut them out. Hope this helps.
![Swivel bucket mounts and belts Dash_010](https://i.servimg.com/u/f82/18/24/07/54/dash_010.jpg)
![Swivel bucket mounts and belts Dash_011](https://i.servimg.com/u/f82/18/24/07/54/dash_011.jpg)
g3chevy / Mr Pontiac- Donating Member
- Street Cred : 35
Re: Swivel bucket mounts and belts
bracket for rear outer leg (in front of belt)![Swivel bucket mounts and belts Seatdr10](https://i.servimg.com/u/f83/12/69/99/95/seatdr10.jpg)
bracket for front inner leg
![Swivel bucket mounts and belts Seatdr11](https://i.servimg.com/u/f83/12/69/99/95/seatdr11.jpg)
![Swivel bucket mounts and belts Seatdr10](https://i.servimg.com/u/f83/12/69/99/95/seatdr10.jpg)
bracket for front inner leg
![Swivel bucket mounts and belts Seatdr11](https://i.servimg.com/u/f83/12/69/99/95/seatdr11.jpg)
1973 454 MONTE- Donating Member
- Street Cred : 36
Re: Swivel bucket mounts and belts
Thanks guys. This helps a lot.
michiganlarry- G3GM Member
- Street Cred : 1
Re: Swivel bucket mounts and belts
Hi my name is Kevin Stroh I make a conversion kit from bench to buckets. I’m on Facebook messenger or you can contact me at kstrohs335@gmail.com, or text me at 586)212-2566. Sorry don’t have business page.
Kevin Stroh- G3GM Newbie
- Street Cred : 0
Limey SE and crice63 like this post
Re: Swivel bucket mounts and belts
g3chevy wrote:michiganlarry wrote:I will be doing this to my sons 75 soon. Â
Thanks
Here's a couple of pics for reference. As far as I know there are no reproduction parts made for mounting bucket seats for these cars. Your best bet is to find a donor car and cut them out. Hope this helps.
G3Chevy Kevin Stroh does make these he just chimed in today He Makes them for the seats and Console actually
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 98
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» Rusty's progress Carpet Chevk now onto floor replacement
» PARTS NEED TO GO FOR OUR MOVE I DONT WANNA TAKE WITH
» Need driver side bucket seat 73 Laguna
» Laguna NOSE
» Virtual Ink from this weekend
» 1973 Chevelle SS Station Wagon
» Elcofest 2023
» Wanted drip rails for 1975 four-door Chevelle Malibu-Thanks!
» Parts please