big week end coming
+4
Limey SE
1973 454 MONTE
WyldeBill66
driveit
8 posters
G3GM :: Media :: G3 Project Pictures
Page 2 of 2
Page 2 of 2 • 1, 2
what one would you get
Re: big week end coming
Looks to me he Just changed sides for the Battery for the other is rotted out
Limey SE- Management
- Street Cred : 97
Re: big week end coming
I love that fuel line to the carb....about two feet to long.

dynchel- Donating Member
- Street Cred : 40
Re: big week end coming
Positive runs from the drives side where it to has a terminal each side has a ground
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
only other reason is a stereo system than for we all know that diesel wasn't an option they use dual for high power stereo's
Limey SE- Management
- Street Cred : 97
Re: big week end coming
Your motor looks better than mine when I got my car.
Body looks decent too.
Hope you can get it running. Does it turn over y hand?
Body looks decent too.
Hope you can get it running. Does it turn over y hand?
77mali- Donating Member
- Street Cred : 62
Re: big week end coming
They had a Jerry rigged hot wire so you could spin the starter but with column drilled out and the unit that the rod in column goes to laying loose it wouldn't start of course but spins over the way they had it
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Looks dusty & not "oily"...that's encouraging. Good luck!
77mali- Donating Member
- Street Cred : 62
Re: big week end coming
Yea fingers crossed but I gotta find a column as close to free as I can lol
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Man the guy that was the owner prior to the guy I got the car from is asspecial kinda stupid. I now have to buy a heater box this idiot cut it in 1/2 then permatexed a piece of plastic to the fan side wtf.the column I'm fairly sure isn't the correct one since it won't even bolt up thank god for the guy I'm getting mine from
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
You gotta love back woods (hillbilly) workmanship.

dynchel- Donating Member
- Street Cred : 40
Re: big week end coming
I could understand pulling for racing but to cut it in 1/2 then putting a pc of plastic over the gaping whole what was the purpose of that. Gonna have to get wiper arms 2 mismatched ones in the trunk one was original had the main arm and the little one that pivots other is from I'm assuming a cutlass of the 76-77 time frame cause looks like one I had on my old Monte Carlo and I say cutlass cause there is a door card in trunk from a cutlass
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
And the carb even though it's good will never work on the car. It is off a gmc and is set up for push linkage not pull cable like our cars. Think carb was slapped on when AZ owner traded it for a motorcycle
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Well if the rain and flooding ever stop I can go get my parts and bring it home to my new place to get some work done on it
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Thanks guys now if interior was 1/2 as nice
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
https://static.photobucket.com/player.swf?file=https://vid783.photobucket.com/albums/yy119/dragonmaster093/20130613_161006_zps2eb26f25.mp4
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Well car runs drive shaft in oil changed carb changed need to fix some vacuum leaks and reroute some lines then move on to wiring and putting interior back together. But on jackstands actually seen tires move under there own power. woot woot
dragons_lair59- Donating Member
- Street Cred : 11
Re: big week end coming
Tell me about it mama not as pissed off I got it now lol she just looks at $$$ going out not the big picture when done. I can also say that the newer electronic qj carbs work with out all the wiring
dragons_lair59- Donating Member
- Street Cred : 11
Page 2 of 2 • 1, 2
G3GM :: Media :: G3 Project Pictures
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|
» SE.....maybe
» HELP! Buying online - price estimate
» Dash Pad For Sale
» Happy birthday to my Chevelle
» LOOKING FOR a 1976 Cutlass Supreme Rear Bumper
» 1973 Chevelle Production Numbers
» Rusty's progress Crossmember and trans done
» 1973 4 door laguna frame same as 1973 2 door chevelle
» '77 Cutlass 442- NoCal