Re: Where are you at picture

by REVINKEVIN / Mr. 600+HP Wed May 12, 2021 1:13 pm

Thank you. Just think that after all of this work it will never look as good as your Monte.

by Limey SE Wed May 12, 2021 3:27 pm

My 11 year old Daughter was helping me yesterday getting it ready for the June 5th show here She put the headlight bezels on and helped me organize for todays Activities of bumper swap Helped me set up the new to me Air Compressor also What a sweetheart.

Where are you at picture - Page 16 18637410

Where are you at picture - Page 16 18482910

by g3chevy / Mr Pontiac Wed May 12, 2021 4:10 pm

Its awesome having the kids interested in our hobbies. She will be an amazing gearhead by the time she starts driving.

by Limey SE Wed May 12, 2021 4:41 pm

g3chevy wrote:Its awesome having the kids interested in our hobbies. She will be an amazing gearhead by the time she starts driving.

Yea she always wants to help either with Older sisters Truck or with my SE She put on the Some of the trim and headlight bezels and smiled the whole time doing, Unfortunatly I do not have enough time to swap the 454 into the SE before the June 5th Car show so just gonna get her shined up like a purty turd and attend it LMAO

by REVINKEVIN / Mr. 600+HP Thu Jul 08, 2021 4:34 pm

Well, I am having some fuel pump issues that is keeping me from finishing my car so I just took a picture of it as therapy.

Where are you at picture - Page 16 5c0d0310

by 73ss Thu Jul 08, 2021 6:12 pm

Funny you mention that. Same here, Dropped the tank last night.

by REVINKEVIN / Mr. 600+HP Thu Jul 08, 2021 6:59 pm

I just dropped the tank yesterday laying on my back in the driveway. I just can’t get my Holley HP125 to pull the fuel from the tank. I think that this pump only works good with a sump. I am going to try to relocate the pump later tonight. I will pull fuel from a gas can, just not through my 1/2” tube sending unit.

by 73ss Thu Jul 08, 2021 7:29 pm

Unfortunately, You are correct. I was thinking of going with the same pump or one of the fancy brushless ones. I did some research & called Holley for some advice. They said all of their external pumps are designed to be used with a sumped tank, or a fuel cell. As you know, Our cars pull from the top of the tank. I decided upon a holley in tank unit. Everything went great at first. When I first installed it, I was getting 6psi steady dead nuts. After a few weeks and some hard pulls the car would nose over. Hooked the gauge back up and sure enough pressure was low. Called Holley and they sent me a new pump. I'll get it installed over the week-end.

The new pump came and shocker here: Made in the land of the corona virus!!!! Ticks me off. I hope this will not be an on going problem here. If it is, I'll match the specs to a good Walbro or Delphi pump. I even spent an extra $100 on a extra long sock to go towards the back of the tank since the pump assy is mounted up front.

Can you go mechanical? My newly installed gen 6 block has no provision for a mechanical pump.

by REVINKEVIN / Mr. 600+HP Thu Jul 08, 2021 7:49 pm

Yes, I can go mechanical as my block is a 1971 or so. I have a lot of time and energy invested in this system so I want to make it work, but I still may be forced to go mechanical. I bought the Robb 1/2 pickup and I don’t want to change that. Plus I have already wired everything up including the relay for the pump. If I do change over, I won’t be buying Holley. I am looking at the Edelbrock Victor pump right now. I definitely don’t want to sump my tank as it’s brand new as well. Plus, I had a sump on a street car in the past and every time I went around a corner fast I would run out of gas. This fuel issue is about the last thing standing in my way from my first drive down the road. I have had this car 7 years now and I have never driven it. I think it’s about time.

by 73ss Thu Jul 08, 2021 8:56 pm

The Victor pump is mechanical? I have read where Robb makes one hell of a good mechanical pump as well.
I hear you on the time & energy. I made phone calls, e mails, etc to avoid these very problems and I still ended up with one.

by REVINKEVIN / Mr. 600+HP Thu Jul 08, 2021 9:16 pm

Hey. It’s frustrating at best. I have read every Holley document and nothing is ever mentioned about it not working with a sending unit. It only states to mount it below the fuel level. It is pouring outside right now so I can’t get under the car. Maybe in the morning. The Victor pump is a machnical one for sure. I have it and an ARP pushrod in my Jegs’s cart right now.

by g3chevy / Mr Pontiac Thu Jul 08, 2021 10:12 pm

Kevin, if you go with a in-tank pump you can use hydramat fuel pickups that Holley offers to prevent fuel starvation during hard acceleration or cornering. The guys on the G Body forum seem to like it a lot, but it's expensive. Me being old skool, I'd do the mechanical pump and call it a day. It will definitely get you down the road.

by REVINKEVIN / Mr. 600+HP Fri Jul 09, 2021 12:07 pm

Well, I just ordered the machanical pump and pushrod for the Laguna. I must say that I am P****D off about having to do that. Nothing like getting whacked at the knees right at the end of a project. Now I have to get all of the relay wiring out along with the pump and sell them to recoup some of my money. A 50% loss for sure. So, if someone has a tank with a sump in it, I have a really nice pump for sell.

by g3chevy / Mr Pontiac Fri Jul 09, 2021 1:21 pm

You won't be as upset when that beast fires up and you're tearing up the concrete and terrorizing the neighborhood!

by REVINKEVIN / Mr. 600+HP Fri Jul 09, 2021 2:32 pm

The only thing that I want to terrorize right now is Holley’s tech department. You know how I think, I am going to make the best of this situation. What doesn’t kill you makes you stronger. You didn’t think that I read those fortune cookies did you?

by REVINKEVIN / Mr. 600+HP Wed Jul 14, 2021 8:26 pm

Hey. G3pontiac stopped by today and it was monumental! We swapped out the fuel pump and redid some lines and the car started right up. Well, almost, but it now starts without even tapping the gas. I still need to iron out some things with the electric fans and do a valve adjustment, but it runs and sounds pretty amazing. Oh, by the way, we drove it around the cul-de-sac. This is the first time that I have ever driven this car. Things are getting closer to putting the Laguna on the road. Wow. I can’t thank g3pontiac enough. Great day.

by g3chevy / Mr Pontiac Wed Jul 14, 2021 9:55 pm

I 2nd that! It was a great day. The engine sounds amazing. Even the neighbors pool guy had to come over and gaze at this beast that was making all that noise! Looks like Hot Rod Power Tour is right around the corner for RevinKevin!

by REVINKEVIN / Mr. 600+HP Fri Aug 06, 2021 4:36 pm

Hey. I have been working on my YouTube channel and I received an interesting like from Global West suspension. Kind of neat. The car drove a little further down the street yesterday. My power steering pump is leaking so g3chevy and myself took it apart. Looks like the auto parts store sold me a hose with a fitting that doesn’t match the pump they sold me. I am still having trouble with my Derale fan controller not working. I made a jumper to make it work. Some of the new parts are just DOA. They are new, but have been sitting on the car for a few years while I was taking my sweet time finishing up. Check out the picture from my like. Cheers.

Where are you at picture - Page 16 F2ec1510

by g3chevy / Mr Pontiac Fri Aug 06, 2021 9:26 pm

You have made the big time my friend.

by S3TPI Fri Mar 25, 2022 4:44 pm

Enjoyed the read! Thumbs up

by g3chevy / Mr Pontiac Fri Mar 25, 2022 6:51 pm

This will be one fun Laguna once we get all the bugs worked out. Waiting for Kevin to quit doing that thing they call a "job" so we can finish this beast.

by REVINKEVIN / Mr. 600+HP Fri Mar 25, 2022 9:00 pm

That was a lot of work. I was lucky enough to have the best Technical Advisor just this side of Raleigh/Durham. Even Cale Yarborough has called g3chevy for his input on his Laguna championship winning cars. True praise indeed.

by g3chevy / Mr Pontiac Sat Mar 26, 2022 10:37 pm

Cale who??? LOL I'm just thankful I get to play with a car with an engine that cost more than my first house. Now, lets gitter dun!

by REVINKEVIN / Mr. 600+HP Mon Nov 06, 2023 2:39 pm

Hey. I just dug this out of storage. Cleaning it up and trying to finish it.

Where are you at picture - Page 16 Img_8910

by Limey SE Mon Nov 06, 2023 11:31 pm

See ya when and if I see ya Rusty sleep tight

Where are you at picture - Page 16 26287010

by Sponsored content